N1 KDO's VX-5R Crib Notes
KEY: 1 / TN FRQ
KEY ALONE: Frequency Entry Digit "1"
FW then KEY: Activate CTCSS or DCS operation
KEY HELD DOWN: Enable display of sub-band frequency
KEY: 2 / CD TAG
KEY ALONE: Frequency Entry Digit "2"
FW then KEY: Activate CTCSS or DCS code number
KEY HELD DOWN: Select Frequency only on Frequency and Label
display
KEY: 3 / DT VLT
KEY ALONE: Frequency Entry Digit "3"
FW then KEY: Activate the DTMF autodialer function
KEY HELD DOWN: Display battery voltage and type
KEY: 4 / MG DSP
KEY ALONE: Frequency Entry Digit "4"
FW then KEY: Activate the Memory Group Mode
KEY HELD DOWN: Select large or small display characters
KEY: 5 / AP ICO
KEY ALONE: Frequency Entry Digit "5"
FW then KEY: Activate Automatic Power Off Feature
KEY HELD DOWN: Select alphanumeric or icon display
KEY: 6 / RP ONT
KEY ALONE: Frequency Entry Digit "6"
FW then KEY: Select + or - repeater shift
KEY HELD DOWN: Display operating and transmit timers
KEY: 7 / ST TMP
KEY ALONE: Frequency Entry Digit "7"
FW then KEY: Select Tuning Step for VFO Operation
KEY HELD DOWN: Display internal temperature
KEY: 8 / BRO
KEY ALONE: Frequency Entry Digit "8"
FW then KEY: (none)
KEY HELD DOWN: Display current barometric pressure
KEY: 9 / BP ALT
KEY ALONE: Frequency Entry Digit "9"
FW then KEY: Enable/Disable Keypad Beeper
KEY HELD DOWN: Display current altitude
KEY: 0 / SQ WX
KEY ALONE: Frequency Entry Digit "0"
FW then KEY: Adjust the Squelch
KEY HELD DOWN: Recall weather channels
KEY: BAND / SET AR
KEY ALONE: Change Band
FW then KEY: Enter "Set Mode"
KEY HELD DOWN: Activate ARTS feature
KEY: MR / SKP SC
KEY ALONE: Switch to Memory Mode
FW then KEY: Mark a channel to be skipped during scan
KEY HELD DOWN: Initiate Memory Channel scanning
KEY: HM/RV / EMG
KEY ALONE: Reverse Transmit and Receive Frequencies
FW then KEY: Switch to the "Home" channel
KEY HELD DOWN: Activate the Emergency Feature
KEY: TX PO / LOCK
KEY ALONE: Select Transmitter Power
FW then KEY: Activate Keyboard Lock
KEY HELD DOWN: (none)
KEY: VFO / DW SC
KEY ALONE: Select VFO Mode
FW then KEY: Activate "Dual Watch"
KEY HELD DOWN: Activate VFO scanning
KEY: PTT
KEY ALONE: Transmit
FW then KEY: Temporary High Power Transmit
KEY HELD DOWN: Transmit
KEY: MONI
KEY ALONE: Disable Squelch (Noise and Tone)
FW then KEY: Reverse Transmit and Receive Frequencies
KEY HELD DOWN: (none)
KEY: LAMP
KEY ALONE: Illuminate Display and Keypad for 5 seconds
FW then KEY: Activate Spectrum Analyzer Feature
KEY HELD DOWN: Lock Display and Keypad lamp on until lamp
button pressed
Disclaimer: The information on this site is provided as
a public service to the blind and visually handicapped community. While we have
done our best to ensure the information provided is accurate, please realize
the use of any information on this site is solely at your discretion and we
take no responsibility for use or attempted use of this information. |
